CRClarke - Edge Finishing

Home > Product > Edge Polishing List

Diamond Polishing

The material to be polished is loaded onto the feed track of the machine. The feed system guides it over a rotating diamond tipped cutter hub, which removes a small amount from the edge of the material. The combination of machine accuracy and cutter geometry can convert a sawn edge to a mirror polish in one operation.

Flame Polishing

An electrolytically generated gas is fed up to a small gas torch, where it is ignited. The resulting flame can polish a piece of thermoplastic material by applying a concentrated heat to the edge very quickly, thereby avoiding transfer of heat into the body of the material.

Polished acrylic blocks

Machine List
Accessories
Videos
Instructions
Data Sheets

	Machine Description	Capacity
	Flame Polishing Unit FP01/2	FP01 is a single torch machine. FP02 can operate two torches simultaneously.
	Diamond Edge Polisher 1525	500 x 400 x 25mm
	Diamond Edge Polisher 1550	1850 x 900 x 50mm
	Diamond Edge Polisher 1575	1500 x 900 x 100mm with variable angle range from 90° to 45°

	Equipment	Description
	Extraction System 1525E	Extraction System for 1550 & 1525
	Spare Torch	Spear Torch for FP01 and FP02 Flame Polishing Unit.
	Tips	Pack of 10 Torch Tips Size 18 or 20.

Diamond Polisher 1550 Instruction	Diamond Polisher 1550 Cleaning the Filter	Diamond Polisher 1550 Cleaning the Transport Belts
Diamond Polisher 1550 Removing the Cutter Hub	Diamond Polisher 1525 Instruction	Flame Polisher FP01 Instruction

Machine	Instruction				Other Documents
Flame Polishing Unit FP01/2
Diamond Edge Polisher 1525
Diamond Edge Polisher 1550

* To view the documents you'll need Adobe Reader software installed – click to download

Technical Data Sheets
Introduction to Thermoforming - Plastic Materials
Diamond Edge Polisher 1525 Data Sheet
Extraction Unit 1525E Data Sheet
Flame Polishing Unit FP01/2 Data Sheet

* To read the documents, you need to have PDF reader installed on the computer.